Find out why thousands of RVers have chosen RV SnapPad to make RVing faster, easier and more convenient than ever before!

Can't find your rig in the search bar? Click here

Close

HiWay 8 Bus 4-Pack

Regular price MX$ 5,172.00

HiWay 8 Bus 4-Pack

Regular price MX$ 5,172.00

"The purchase process was simple and putting them on even easier. Awesome addition to any camper, fifth wheel or RV. Would highly recommend it as one of the first RV accessories to purchase."

John M. | Verified SnapPad Customer

IMPORTANT: Check Clearance Before Ordering

More info

Clearance Warnings

  • Warning: Jack assembly can be close to the tires on some RVs. SnapPads rubbing on the tires or being pulled off of the rear feet completely when in transit.
  • Clearance Check: Standard clearance check for 2” to the side and ¾” from the top edges of the jack feet to anything in close proximity is advised for both front and rear jack feet. 
  • Notes: These pads require at least 2” of full clearance with the jacks fully retracted, airbags expanded, travel mode activated, and for dual axel models. 
  • Turning the wheels fully in both directions during the clearance check is advised. 
  • The front jack feet should also be checked for proximity and position to the above crossbeam or metal crossbeam end plate under the RV.

Limited Stock Remaining!

available at
2-Year
Manufacturers
Warranty
Fast Shipping
Proudly Made
in the USA
Description

Conquer your Motorhome's leveling struggles with our HiWay 8 Bus pack - perfect for HWH auto-leveling systems made up of 8" and 11.5" round jacks. Newmar & Tiffin Class A Motorhomes often feature two 8" round jacks in the front and two 11.5" round jacks in the rear - so this package is tailor-made for you! Attach HiWay 8 Bus for permanent ends to your leveling woes.

UPC CODE 874119000134

Special Considerations:

Special consideration for Tiffin Allegro Bus Owners - Please confirm your rear jacks have adequate clearance from the rear tires. Make sure you check when your RV is in travel mode (jacks are fully retracted and airbags are full). You will need at least 2" between the landing foot and tire to avoid SnapPad clearance issues.

Special Considerations

Product Add-Ons

Woman stands with SnapPad on Motorhome

Installation

The Ultimate RV Accessory

SnapPad on leveling system on dirt terrain

Permanent Attachment

Installs in seconds. Stays on forever. Say goodbye to crawling under your rig for leveling blocks.

about-rv-snappad-story

Larger Surface Area

Enjoy greater stability inside and out of the rig, leading to less shaking and rocking, and a more enjoyable RVing experience.

Enhanced Protection

Your jacks are protected from the elements with SnapPads installed. No more damaging the surfaces you park on either.

Environmentally Friendly

Over 50,000 tires have been taken from American land fills and converted into long-lasting, rugged SnapPads.

Anti-Slip

With SnapPads installed, your rig will have less slipping and sliding on all terrains and conditions.

Electrical Insulator

Rubber SnapPads help ground your rig during thunder storms, so you don't need to worry about damage to your systems or appliances.

Carousel Controls

Explore Our Accessories

SnapPad® is a registered trademark of Origen RV Accessories Ltd. Level Up® and LCI® are registered trademarks of Lippert Components, Inc. Power Gear is a trademark owned by Lippert Components, Inc. Origen RV Accessories Ltd. and SnapPad are in no way affiliated with, sponsored by, or endorsed by Lippert Components, Inc. HWH trademark is owned by HWH Corporation. Origen RV Accessories Ltd. and SnapPad are in no way affiliated with, sponsored by, or endorsed by HWH Corporation. All other product and company names are trademarks of their respective owners.